Check oil level & top up engine oil

oelstand_pruefen

This time we are dedicating ourselves to two maintenance jobs on your car that really every driver can do themselves: checking the oil level and topping up engine oil. How all this works, what you should pay attention to – all this and much more, you can find out here! are you ready Then let’s get started!

That’s why you should check the oil level regularly

The engine oil ensures that the engine – the heart of your car – is lubricated. In this way, the individual components are subjected to less stress. If you do not have enough oil in your vehicle, this can have serious consequences:

  • Without sufficient lubrication of the engine oil, the cylinders and pistons rub against each other very strongly.
    • Through this takes not just that wear too – high temperatures occur, which can cause the piston to seize up.
    • This is a so-called butt eater and mostly irreparable damage.
  • Also the engine power strong with too little oil to.
Good to know: Modern cars are equipped with an oil warning light. However, this often does not light up because of the oil level: the on-board computer only tells you that the oil pressure is too low. In this case, however, damage has usually already occurred. However, some vehicles are equipped with an oil level check – there it is done at the push of a button. As a precaution, however, you should still check manually.
You should check the oil level regularly to avoid engine damage.

How much engine oil does your car need?

Neither too much nor too little. Because: Not only too little oil damages the engine – even if you accidentally fill in too much of it, this has negative consequences. Why? Very easily:

  • If the oil is already filled up to the crankshaft, this foams the engine oil, so that small form blisters.
    • Due to this formation of bubbles, the oil lubricates less well – and wear increases.
  • With a diesel vehicle, the so-called oil puller come.
    • The oil is sucked directly into the engine and burned there.
    • This can lead to severe engine damage.
  • Also a too high oil pressure is the result if you have filled in too much engine oil.
    • This can then lead to oil loss.

This is exactly why you should check the oil level regularly. In this way you avoid engine damage and expensive repairs. How it works? Of course we will tell you that too!

Checking the oil level: how it works!

Even if this is a simple job, there are still a few things to consider beforehand:

Prepare oil level check

  • Before checking the oil level, drive the engine warm.
  • Then place your car on a flat surface away.
  • Then you wait about 5 minutes for this to happen Engine oil collected in the oil pan Has.

Already done these steps? Then we can explain to you straight away how to measure the oil level. Here we go!

Checking the oil level: step-by-step instructions

  1. First you open the hood.
  2. Then you look for the oil dipstick – if you can’t find it that easily, you can find out where exactly it is in your car in the vehicle manual.
  3. Now pull out the oil dipstick completely and clean it with a lint-free cloth or rag – after all, you don’t want lint to get into your engine oil, do you?
  4. Then you put the rod back in completely and pull it out again immediately.
  5. Now all you have to do is read off whether the oil residue is between the “Min” and “Max” markings.
Check oil level
Check the oil level – ideally this should be between “Min” and “Max”.

In the best case, the oil level is in the upper half of the mark. If it is too high, you should visit a workshop to get to the bottom of the cause and have the excess oil siphoned off. If there is not enough oil, you should top up with the correct engine oil. We will tell you how to do this in the next step-by-step guide. Just read on to find out more!

Not enough oil: top up engine oil

As we have already mentioned, you should top up the engine oil when you run out of it. And here are the instructions:

Important information in advance: Make sure you have the right engine oil ready beforehand – the wrong oil can cause serious damage to the engine. You can find out whether you need 5W-30 or 5W-40 or perhaps another oil for your car in the vehicle manual or on the oil change trailer from the last oil change.

  • First you look for the lid of the oil – recognizable by a small oil can and the eye-catching color.
  • Did you find him? Great, then you open it and carefully fill in the engine oil.
    • Try not to spill: motor oil is bad for the environment.
    • It is best to use a funnel for filling so that nothing goes astray.
  • In between, you should always check the oil level so that you don’t top up too much engine oil – make sure you wait a little bit so that the oil can collect in the oil pan.
  • As soon as the oil level can be seen in the upper half between the “Min” and “Max” markings, you can stop filling.
Tip: If the oil change is due again, you can do it yourself. You can find out how this works and what you have to pay attention to with just one click on the previous link! By the way, in a separate article we will tell you how to properly dispose of used oil.
motor_oil_refill
Use a funnel when adding engine oil to avoid stains and environmental damage.

Now you already know everything you need to know about checking the oil level and topping up engine oil! Do you still have questions? We definitely do: Do ​​you check the oil level regularly? Do you also make sure that there is always enough engine oil? Are there perhaps even exciting stories about it? Tell us in a comment!


Source: https://www.atp-autoteile.de/blog/oelstand-pruefen-und-motoroel-nachfuellen/

Leave a Reply

Your email address will not be published.